The City of Lakeland, Fla., has cut idle fuel costs by an average of 26% on its 80 police vehicles by using engine calibration software. The vehicles idle six to eight hours every day.
by Staff
March 9, 2015
Photo courtesy of Derive Efficiency.
2 min to read
Photo courtesy of Derive Efficiency.
The City of Lakeland, Fla., has cut fuel costs from idling by an average of 26% on its 80 police vehicles by using engine calibration software. The vehicles were idling approximately six to eight hours per day and since they are often used as a mobile workspaces and command centers, turning off the ignition is often not feasible.
Derive Efficiency specializes in tuning the software of an engine. With a quick software update, Derive was able to reduce idle levels, which in turn generated immediate fuel savings for the city.
Ad Loading...
“The low cost and the quick application is a big payoff. Literally minutes per vehicle to install, all without having to invade or leave anything behind in the vehicle,” said Gary McLean, fleet manager at City of Lakeland. “Some of the other technologies out there are extremely intrusive and they are costly. We chose to do things that have an immediate impact at a low cost and Derive has provided just that.”
The city tested the software on police and administrative vehicles as well as pick-up trucks for six months.
Derive Efficiency can reduce idle fuel consumption by up to 30% for less than $400. The system does not need hardware installation, which the company says makes it less costly than its competitors’ products.
According to Derive, the average police cruiser consumes roughly 0.4 to 0.6 gallons of fuel per hour in idle, and the average police SUV can consume almost double this amount. The calibration software allows drivers to keep their vehicles running, but at a lower RPM.
The City of Lakeland has a diverse fleet of vehicles that include police, fire, utility, construction, and refuse. Derive customized the engine software for 158 of these vehicles: 80 law enforcement vehicles and 78 more from the city’s maintenance division.
The Mooresville Police Department has launched a Drone First Responder program, using drones to provide real-time aerial support and faster situational awareness during emergency calls.
The Culpeper Police Department has unveiled a new fleet design inspired by the Blue Ridge Mountains, selected through a department-wide process involving both sworn and civilian staff.
Powell, Ohio, is using fleet data and lifecycle analysis to guide police vehicle purchases and replacement timing, a strategy expected to save the city nearly $400,000 over five years.
Working to eliminate errors and challenges and increase reliability during fueling, the Madison County Sheriff’s Office has implemented RoadFlex for its 37-vehicle patrol fleet.
How an uncrewed police ground vehicle is providing technical assistance to the Miami-Dade Sheriff’s Office through a pilot program with the goal of supporting officers and reducing crime through increased marked police presence.
The Police Fleet Innovators Award is for fleet operations teams that have come up with innovative solutions to common problems in law enforcement fleets. Click for deadline details, plus an award FAQ.
What did police fleets actually wrestle with in 2025? We highlight the most impactful stories on vehicles, funding, technology, and operations, distilling the key takeaways for fleet and command staff.
