The stick-and-go solution reduces vehicle downtime that results from complicated dongles and...

The stick-and-go solution reduces vehicle downtime that results from complicated dongles and installation processes.  

Photo: I-Sticker

Some fleets desire extremely in-depth information from the telematics solution they’ve decided to use. While being able to track vehicle health is important, there’s more to reducing downtime than just keeping track of miles driven and engine idle time. Driver behavior plays a large role in keeping a truck ready to work.  

Roman Ferster, CEO of RGRAUTO Inc., has been working in the IoT and safety solutions industry for almost 20 years, mainly with corporate, commercial, and government fleet customers. Now, his company is bringing the I-Sticker to the American market: a small telematics device with two adhesive pads that can be stuck to the inside windshield of a vehicle.  

While the I-Sticker was only recently introduced to the US, the company has been selling them in Europe since 2018. They’ve garnered the business of several large customers, including insurance, fast-moving consumer goods, and pharmaceutical companies. 

“Most telematics systems require professional installation,” said Ferster. “No matter how simple or difficult, it's still extra work that can lead to vehicle downtime and even risk damage to the vehicle.” 

The I-Sticker enables fleet managers to remove complicated installation procedures from the process of implementing telematics. Like every electronic device, traditional solutions can fail at some point, meaning drivers will have to take time out of their day to bring the vehicle back so the tracker that is physically connected to the vehicle can be removed, repaired, and/or replaced. 

“When you are going to install traditional telematics in hundreds, or even thousands, of vehicles, it can take many months and even a year to complete the installation process for the entire fleet. It takes so long that by the time you finish, you need to start again because of updates, upgrades, vehicles changes, etc,” he said.

The I-Sticker collects data like any traditional telematics tracker: using internal components like a GPS module, G sensor, accelerometer, movement sensor, and Bluetooth or optional e-SIM in order to send captured events to the cloud. In order to avoid sending excessive data, the I-Sticker uses patented smart algorithms so only the data you need is transmitted to the cloud. Since it is totally wireless, it doesn’t monitor factors like engine health or fuel levels, but it does detect driver behavior like harsh acceleration, hard braking, cornering, and speeding; can be used to track vehicles with geofencing; route history; and more behaviors that can be causes of vehicle downtime.  

For first-time initialization, drivers simply download the mobile app, hit the calibrate button, and the device is ready in one minute. If something happens to the device, it can be easily removed from the windshield and sent back for a repair or replacement without extra costs and downtime.  

Helpful Features  

I-Sticker also has a Bluetooth low energy (BLE) function that enables it to connect with other systems, like a driver’s smartphone or tablet, and use them as a modem. This eliminates the need for another SIM card, which requires a contract with a service provider. 

Another advantage of the embedded BLE module is the automatic Driver ID functionality. When a driver gets in their truck, their phone automatically pairs with the device without the need for any special actions by the driver. Fleet managers can see a logbook with the name of the driver.  

“Let’s say after one month, you get a ticket, other violation, or any complaint. It’s simple to go into the system and figure out who was behind the wheel at the time so you can correct the behavior,” he said.  

I-Sticker Telematics Device Simplifies Data Collection
I-Sticker Telematics Device Simplifies Data Collection

Data Collection and Visualization

While telematics devices typically collect similar data, the main difference lies in the dashboard/portal fleet managers use to access that data. 

With the sheer amount of data collected, it can be extremely difficult to break down what information is actually helpful. A problem that comes with collecting this data is that drivers tend to see these devices as a form of policing. Drivers tend to leave their employer because of systems with the “big brother” image. In most cases, fleet owners and managers do not have the time and resources to work with big data.

“There’s no need to follow everyone; not all your drivers are doing something wrong. I-Sticker is an assistant and coach rather than a spy. If a driver exceeds a defined threshold, like speed limit, driver hours, or acceleration, he receives real-time feedback and you receive an alert to your phone, email, or via scheduled reports. This way, you’ll only be receiving data that will help you to manage your fleet effectively. With I-Sticker, instead of drowning in endless streams of emails and excel sheets, you can focus on only the 20% of data you really need to,” he explained.  

By using this smart telematics technique, a fleet manager won’t have to train or hire extra employees to analyze data, reducing the total cost of ownership of the system. The I-Sticker software collects data in an intuitive way and presents it in a user-friendly graphic interface. 

“A fleet manager can see everything from the first click on the dashboard without needing to dig deeper into the portal,” he said.

While I-Sticker offers an analytically powerful portal and an easy-to-use dashboard, if a customer would prefer to use the I-Sticker with a dashboard from another provider, they can. The company uses a standard API in order to transmit all data to the cloud of its partners and third parties.

Another important advantage of the I-Sticker is that it helps fleet managers to connect all their vehicles and assets into one unified system regardless of their type. Fleet unification is a real challenge for diverse fleets with different types of vehicles, years, makes, and standards. With I-Sticker, it doesn’t matter if it is a 1957 Chevy or 2021 Ford, they can become IoT connected in no time with no hassle.

“These vocational fleets need to be moving and bringing in money. They don’t need complications that will require them to go somewhere and wait for three hours until the installation is done,” Ferster concluded.

More information: contactus@rgrauto.com

Originally posted on Work Truck Online

About the author
Lexi Tucker

Lexi Tucker

Former Senior Editor

Lexi Tucker is a former editor of Bobit.

View Bio
0 Comments