Rislone Steering Stop Whine Eliminates Whining, Leaks and Sluggishness
Rislone High Mileage Power Steering Stop Whine with Leak Repair contains a blend of viscosity improvers, anti-wear friction modifiers and pressure performance additives.

Lubricity additives smooth out rough, hard, and tight steering and reduce friction.
Photo: Rislone
Rislone High Mileage Power Steering Stop Whine with Leak Repair is a new solution for customers suffering steering “whine,” sluggish steering or a power-steering system leak in their high-mileage cars, SUVs, and light trucks.
Power steering problems are common in older vehicles, especially those clocking 75,000 miles or more. If ignored, noise and whining, minor leaks, and hard steering complaints may only get worse over time.
“High Mileage Power Steering Stop Whine with Leak Repair can cost-effectively and quickly solve a range of power-steering issues,” explains Clay Parks, Rislone vice president of strategic development. “It’s an affordable solution to noisy power steering systems that generally occur when the system is low on fluid, there is air trapped in the fluid, or the vehicle has some mechanical issues.”
The product contains a blend of viscosity improvers, anti-wear friction modifiers, and extreme-pressure performance additives. It is formulated to stop bearing, piston, and valve noises inside the power-steering pump. Special lubricity additives smooth out rough, hard, and tight steering and reduce friction. Stop leak additives repair minor leaks and help prevent new ones.
Rislone High Mileage Power Steering Stop Whine with Leak Repair:
Quiets noise/whine
Stops fluid leaks
Fixes hard steering
Renews worn rack and pinion
Stabilizes power steering fluid
Protects the steering system against future wear and leaks
Customers can use Rislone High Mileage Power Steering Stop Whine with Leak Repair to top off existing fluid when low or add a bottle as a preventive-maintenance measure whenever power steering fluid is changed. It’s compatible with all types of domestic and imported power steering fluids, including petroleum and synthetic formulas, and works with systems that use ATF automatic transmission fluid.
Most passenger cars and light trucks require one 11.8 oz (350 ml) bottle for every one to three quarts of power steering fluid. In smaller systems (those under a quart of capacity), use half a bottle. Depending on the power steering problem, results will either be immediate or noticeable within a few days of driving. A second application may be needed for hard-to-stop leaks or to solve other system issues.
More Products

BendPak Debuts 12APF Two-Post Lift for Tall Vehicles in Low-Ceiling Shops
New 12,000-lb. open-top lift designed for commercial vans, trucks, SUVs, and fleet vehicles
Read More →
Chevron Rykon Grease Increases Equipment Uptime
Rykon rounds out Chevron’s grease offerings with a grease formulated for heavy-duty and extreme pressure applications.
Read More →
JohnDow PurAbsorb Leaves Clean and Dry, No-Slip Surface
The lightweight, industrial-grade cellulose formula of PurAbsorb provides instantaneous absorption with no leaking, minimizing the risk of spreading hazardous spills and allowing for immediate clean up.
Read More →
Automatic Undercarriage Wash System Now Available Across America
The system has the capability to remove all salt brine, mud, grime, oil, and road sprays minimizing the amount of time that chlorides have to start eating away at the metal preventing rusting.
Read More →
Chevron Simplifies Delo Heavy Duty Engine Oil Product Line
Chevron’s new streamlined portfolio of synthetic blend and synthetic products can be used in all applications where Chevron’s conventional heavy duty engine oils were used.
Read More →
John Deere Enhances Fleet Customer Solution for Self-Repair
John Deere customers operating compatible 4G-connected machines can use this enhanced solution to complete secure software updates directly to an embedded controller through a user-friendly interface using the Equipment Mobile app.
Read More →
VacBuilt System Suitable for Mobile or Shop Applications
A single waste oil collection solution can capture fluids from a mix of different vehicles utilizing different types and grades of oil.
Read More →
LiftWise Hanging Tire Handler Maximizes Efficiency
The hanging tire handler is designed with a capacity to lift tires weighing up to 1,400 lbs.
Read More →
Give EVs a Lift with BendPak's New EV2400SL
The push-around full-rise scissor lift table is designed to make replacing both electric vehicle battery packs and internal combustion powertrain components more efficient.
Read More →
Two-in-One: Dannmar D4-12A Alignment Lift
The 12,000-pound capacity four-post car lift can be used for alignments and general service.
Read More →

