Safety & Accident

Tire Safety Myths and Tips

Tire safety goes beyond a quick check of the pressure — it also includes ignoring the myths that can lead to dangerous outcomes.

February 2014, Automotive Fleet - Feature

by Staff

Photo courtesy of
Photo courtesy of

Whether it's the middle of a historic winter blizzard or a scorching, sticky summer day, properly maintained tires keep vehicles on the road and running safely. When it comes to tire safety, though, in addition to the high number of tips out there to help keep the rubber on the road, there are also some myths that can get drivers in a heap of trouble if they are blindly followed. To sift through this pile of possibilities and find the gems — and discard the fables — AF reached out to experts on the subject.

Roger Marble, consultant, spent four decades in the tire industry, working for a major manufacturer developing tires for applications in North, Central, and South America. In that time, he came across a handful of tire safety myths that have never ever been true:

Myth #1: You can check air pressure by just looking at your tires or kicking the tires. According to Marble, this method is usually off by 10-20 percent or more.

Myth #2: A plug-type repair or using flat fixer fluid injected through the valve is OK. Neither tire companies nor the U.S. Department of Transportation accept this practice, and it will void the tire warranty.

Myth #3: Re-inflating a tire that has been run more than 10 percent low will make it A-OK. "This is like believing that putting the potato salad back in the refrigerator after it sat all day out in the sun will make it OK to eat," Marble noted.

Myth #4: As long as there is tread design left, the tire is safe to use. Certain applications do not put a lot of miles on a tire, so the tire rubber can get too old to properly stretch, causing it to crack. "Tires should be inspected by a tire dealer and a written report issued after five years of use and every year thereafter, and replaced at 10 years, no matter how much tread is left," Marble said.

Myth #5: It is OK to ignore the warning from tire pressure monitor system (TPMS), as you can probably drive for hundreds of miles before service is needed. As with any vehicle warning system, drivers need to take them seriously — ignoring them could cause damage to the vehicle or possibly an accident.

Kurt Berger, manager, consumer sales engineering for tire manufacturer Bridgestone Americas, offered a trio of tips to help fleet drivers ride on road-ready rubber:

  • Inflate: The most important aspect of tire maintenance is proper tire inflation. "Tires can lose one pound per square inch per month under normal conditions," Berger explained.
  • Rotate: Regular tire rotations also will help prevent irregular and premature wear. According to Berger, as many as 40 percent of drivers have not rotated their tires within the recommended distance of 5,000-7,500 miles.
  • Evaluate: Routinely look for signs of tread wear or damage. "The 'penny test' is a simple way to check tread wear," said Berger. "Place a penny in the tread. If Lincoln's head is visible, the treads are too worn and need replacing."

Cutting corners is the last way to keep you safe on the road, according to Brian Remsberg, a spokesperson for Michelin North America. Whether its inspection, inflation, or repair, fleet departments need to take the safest route instead of the quickest one.

"Do not inflate tires to the maximum pressure molded onto the tire's sidewall," Remsberg explained. "The optimum tire pressure required for your vehicle can be found on a sticker in the door jamb, on the inside of the glove compartment door, or in the owner's manual."

The time of day can affect the tire's pressure reading, which is why Remsberg suggestted checking the pressure when the tires are cold, usually first thing in the morning.

When it comes to repairing a flat, it is best to take extra time to ensure that your tire doesn't suffer the same fate soon after.

"The proper way to have a tire repaired is to patch the tire from the inside and fill the puncture hole. Do not have your tire plugged," Remsberg advised.

All four tires need to be checked monthly, since keeping the tires inflated to optimum pressure allows for maximum fuel efficiency and longevity.


  1. 1. Phil Rumian [ March 05, 2014 @ 11:39AM ]

    How many people forget to check the pressure in a spare tire, and and find out the hard way that it's flat? This is very common on vans and SUVs, where the spare is under the vehicle.

  2. 2. Muhammad Aasif Suleman [ April 16, 2014 @ 09:39PM ]

    that is right for our safty with vehicle safty cheking for must for monthly basis prussure & tire condition . i think 90 percent driver not check our spare wheel pressure therefore he problem any long journey.

  3. 3. sam finixx [ July 12, 2016 @ 08:52PM ]

    very good and informative. I almost found the information that I was looking for. Thanks for your all efforts.


Comment On This Story

Comment: (Maximum 10000 characters)  
Leave this field empty:
* Please note that every comment is moderated.


Fleet Management And Leasing

Jack Firriolo from Merchants will answer your questions and challenges

View All


Public Fleet Tracking And Telematics

Amin Amini from Verizon Connect will answer your questions and challenges

View All


Fuel Management

Bernie Kanavagh from WEX will answer your questions and challenges

View All


Recent Topics

Has anyone recently hired an outside consultant to come in and evaluate policies, procedures, staffing and look for efficiencies?

View Topic

Is a bachelor's degree truly necessary in order to become a fleet manager, or does achieving certification as a CAFM or equivalent carry...

View Topic

Fleet Documents

1134 Fleet Documents (and counting) to Download!

Sponsored by

Select states prohibit drivers from using handheld cell phones while driving. Eight states have made talking on a cell phone a primary offense and the driver can be pulled over by a police office without another traffic violation occurring.

Read more