Police Fleet Slashes Idle Fuel Costs by 26%

March 09, 2015

Photo courtesy of Derive Efficiency.
Photo courtesy of Derive Efficiency.

The City of Lakeland, Fla., has cut fuel costs from idling by an average of 26% on its 80 police vehicles by using engine calibration software. The vehicles were idling approximately six to eight hours per day and since they are often used as a mobile workspaces and command centers, turning off the ignition is often not feasible.

Derive Efficiency specializes in tuning the software of an engine. With a quick software update, Derive was able to reduce idle levels, which in turn generated immediate fuel savings for the city.

“The low cost and the quick application is a big payoff. Literally minutes per vehicle to install, all without having to invade or leave anything behind in the vehicle,” said Gary McLean, fleet manager at City of Lakeland. “Some of the other technologies out there are extremely intrusive and they are costly. We chose to do things that have an immediate impact at a low cost and Derive has provided just that.”

The city tested the software on police and administrative vehicles as well as pick-up trucks for six months.

Derive Efficiency can reduce idle fuel consumption by up to 30% for less than $400. The system does not need hardware installation, which the company says makes it less costly than its competitors’ products.

According to Derive, the average police cruiser consumes roughly 0.4 to 0.6 gallons of fuel per hour in idle, and the average police SUV can consume almost double this amount. The calibration software allows drivers to keep their vehicles running, but at a lower RPM.

The City of Lakeland has a diverse fleet of vehicles that include police, fire, utility, construction, and refuse. Derive customized the engine software for 158 of these vehicles: 80 law enforcement vehicles and 78 more from the city’s maintenance division.

Comments

  1. 1. Mark Toelke [ March 11, 2015 @ 12:25PM ]

    Does this modification affect the manufacturer warranty?

  2. 2. Barry M. [ March 12, 2015 @ 09:16AM ]

    If this vehicle goes back to the dealership for service, will the update remain in the system? Or would it be reset to manufacturers spec's?

 

Comment On This Story

Name:  
Email:  
Comment: (Maximum 10000 characters)  
Leave this field empty:
* Please note that every comment is moderated.

FleetFAQ

Fleet Management And Leasing

Jack Firriolo from Merchants will answer your questions and challenges

View All

 

Public Fleet Tracking And Telematics

Amin Amini from Verizon Connect will answer your questions and challenges

View All

 

Fuel Management

Bernie Kanavagh from WEX will answer your questions and challenges

View All

 

Recent Topics

Hello to all the members I am checking to see if anyone is using a company for GPS/AVL called Fleet Complete (AT&T)? I would like to...

View Topic

We are in the middle of standardizing PM process with all of our technicians. And I'm asking if anyone has a standard pm checklist for...

View Topic

Fleet Documents

1134 Fleet Documents (and counting) to Download!

Sponsored by

Terminology used in some European countries to identify fleet services provided on a fee basis, for example, the management of maintenance and authorizations for repairs and tires. Other services might include the buying of new vehicles for the customer’s account and the selling of used ones on the customer’s behalf.

Read more

Blog

Managing a Police Fleet

How Chevrolet's Tahoe PPV Differs From its Retail Relative

By Michaela Kwoka-Coleman
For the Chevrolet Tahoe PPV, tires are added to the vehicles that are capable of handling speeds of up to 134 mph and the brakes are adjusted to handle frequent stopping at high speeds.

Police Vehicles Pushed to the Limit in California

By Paul Clinton