Stertil-Koni Heavy Duty 2-Post Lifts


June 3, 2009 - Products

Stertil-Koni Heavy-Duty 2-Post Lifts

STEVENSVILLE, MD – The Stertil-Koni heavy-duty two post lift series is a high premium lift. ALI standards (ALI/ALCTV2006) call for 50/50 distribution loads on each arm. Stertil-Koni exceeds those standards and each is able to handle a distribution load of 2/3 - 1/3. No expense was spared in making this series nearly immune to wear. The SK 2070 model has a capacity of 16,000 lbs. and the SK 2082 has a capacity of 18,000 lbs. In addition to the unique engineering design, the following features characterize these lifts.

  • Versatility: Width between columns can be adjusted from 110" to 126". Combination of open floor construction and no overhead lines or connections allow maximum flexibility.
  • Safety: The Stertil-KONI two post lift series is the safest in the industry.
    • Microprocessor - driven control system combined with potentiometer make this the most technologically advanced in the industry
    • High molecular synthetic roller system with 6 rollers per column (self-lubricating) enhance operating stability of the system. Rollers come with a lifetime warranty and are virtually indestructible.
    • Low voltage (24 volt) control system
    • Unique patented mechancial lock operates independently of lifting drive and is always engaged. Lock is gravity-activated and, unlike our competitors, never uses springs which can distort, rust or degrade over time.
    • Automatic arm locking ensure accurate positioning. Arms are automatically unlocked at the lowest postion.
    • Automatic cutout to prevent the lifting arms from "exceeding" maximum height is standard
    • Hose burst valves are incorporated into each piston to prevent unforeseen lowering.
    • Integrated overpressure valves for protection against overload is standard within each unit
  • Hydraulic Lifting System: Unlike many imports used by our competitors, Stertil-Koni never compromises with safety, convenience or utility. Stertil-Koni never uses slack chains, pulleys, levers, spindles or nuts. The latter save money for the manufacturers, but can lead to wear and therefore compromise safety. Stertil-Koni incorporates a full-size hydraulic cylinder in every post. All of our hydraulic systems are tested for 50,000 lifting cycles under maximum load.
  • Telescopic Lifting Arms: These arms are designed to facilitate lifting light vans (SK2070AB and SK2082 models) . Dual telescopic lifting arms are also available (model SK 2070A) for extra - long vehicles with long wheelbases, such as the Freightliner Sprinter and Dodge Sprinter.


Request information about this product
Go directly to this company's home page

See more products & equipment


Public Fleet Tracking And Telematics

Amin Amini from Verizon will answer your questions and challenges

View All
Sponsored by

Arrangements whereby the fleet management company charges expenses for maintenance, tires, or other defined services based on actual experience and only when the costs are incurred.

Read more